You are here: Home > CLI Commands > Just_CLI_Topics > show log bssid-debug

show log bssid-debug

show log bssid-debug{[<number>][all]}

Description

A Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) uniquely defines each wireless client and Wireless Broadband Router. This command shows the controller’s BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. debug logs.

Syntax

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. debug logs for the controller.

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

logging-trace-files

The slog_flash application continuously updates log files to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage. An error occurs when the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. , to avoid this error.

Command History

Release

Modification

ArubaOS 8.0.0.0 Command Introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/