You are here: Home > CLI Commands > Just_CLI_Topics > show log essid-debug

show log essid-debug

show log essid-debug{[<number>][all]}

Description

Show the controller’s ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. debug logs.

An Extended Service Set Identifier (ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set.) is used to identify the wireless clients and Wireless Broadband Routers in a WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection.. All wireless clients and Wireless Broadband Routers in the WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. must use the same ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

Syntax

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set. debug logs for the controller.

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

logging-trace-files

The slog_flash application continuously updates log files to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage. An error occurs when the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. , to avoid this error.

Command History

Release

Modification

ArubaOS 8.0.0.0 Command Introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master or managed devices.

/*]]>*/