You are here: Home > CLI Commands > Just_CLI_Topics > show log security

show log security

show log security{[<number>][all]}

Description

Show the controller’s security logs.

Syntax

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the security logs for the controller.

Example

This example shows the controller’s last seven security logs.

(host)[node] #show log security 7

 

Mar 5 11:53:43 :124004: <DBUG> |authmgr| Local DB auth failed for user admin, error (User not found in UserDB)

Mar 5 11:53:43 :124003: <INFO> |authmgr| Authentication result=Authentication failed(1), method=Management, server=Internal, user=10.100.100.66

Mar 5 11:53:43 :124004: <DBUG> |authmgr| Auth server 'Internal' response=1

Mar 5 11:53:43 :125027: <DBUG> |aaa| mgmt-auth: admin, failure, , 0

Mar 5 11:53:43 :125024: <NOTI> |aaa| Authentication Succeeded for User admin, Logged in from 10.100.100.66 port 1778, Connecting to 10.3.49.100 port 22 connection type SSH

Mar 5 11:53:58 :103060: <DBUG> |ike| ipc.c:ipc_get_cfgm_role:2826 Sending REQUEST for CFGM Role

Mar 5 11:53:58 :103060: <DBUG> |ike| ipc.c:get_local_cfg_trigger_ike:2653 IKE got trigger from CFGM : state :3

 

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

Command History

Release

Modification

ArubaOS 8.0.0.0 Command Introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master or managed devices.

/*]]>*/