You are here: Home > CLI Commands > Just_CLI_Topics > show log user

show log user

show log user{[<number>][all]}

Description

Show the controller’s user logs.

Syntax

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the user logs for the controller.

Example

This example shows the controller’s last ten user logs.

 

(host)[node] #show log user 10

 

Mar 5 13:29:57 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:32:08 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:36:41 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:38:42 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:40:41 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:42:51 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:47:03 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:49:07 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:53:08 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Mar 5 13:55:14 :501083: <WARN> |stm| Probe request: 00:0b:86:cd:1a:00: Invalid Station MAC address from AP 10.3.49.253-00:0b:86:a2:e7:40-1.1.1

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/