You are here: Home > CLI Commands > Just_CLI_Topics > show logging

show logging

show logging facility|server|{level [verbose]}

Description

the IP address of the remote logging server, as well as facility log types and their associated facility levels.

Syntax

Parameter

Description

facility

View the facility used when logging messages into the remote syslog server.

server

Show the IP address of a remote logging server.

level [verbose]

Show logging levels at which the messages are logged. Include the optional verbose parameter to display additional data for logging subcategories and processes.

Usage Guidelines

The ArubaOS logging levels follow syslog convention:

level 7: Emergency

level 6: Alert

level 5: Critical

level 4: Errors.

level 3: Warning

level 2:Notices

level 1:Informational

level 0: Debug

The default logging level is leve1 1. You can change this setting via the logging command.

Example

This example below displays defined logging levels for each logging facility.

 

(host)[node] #show logging level

 

LOGGING LEVELS

--------------

Facility Level

-------- -----

network warnings

security warnings

system warnings

user warnings

wireless warnings

 

This example below displays the IP address of a remote log server. If a remote log server has not yet been defined, this command will not display any output.

 

(host)[node] #show logging server

 

Remote Server: 1.1.1.1

 

FACILITY MAPPING TABLE

----------------------

local-facility severity remote-facility

-------------- -------- ---------------

user debugging local1

 

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, as well as facility log types and their associated facility levels.

Command History

Version

Description

ArubaOS 8.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Configuration mode on Mobility Master.

/*]]>*/