You are here: Home > CLI Commands > Just_CLI_Topics > show memory

show memory

show memory

aaa

amon_recvr

amon_sender

ap {ble_daemon|llpd|meshd|ofald|rapper|rfd|sapd|stm|wcd}

{ap-name <ap-name>}|{bssidBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. <bssid>Basic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.}|{ip-addr <ip-addr>}

apprf

arci-cli-helper

arm

auth

ble_relay

certmgr

cfgdist

cfgm

cli

cluster_mgr

cpsec

ctrlmgmt

dbsync

dds

debug

dhcpd

dhcpdwrap

ecc

fpapps

fw_visibility

gsmmgr

ha_mgr

ip_flow_export

isakmpd

l2tpd

lagm

licensemgr

lldpd

mdns

mobileip

mon_serv

ofa

ospf

phonehome

pim

pptpd

profmgr

rtpa

slb

snmpd

stm

syslogdwrap

ucm

udbserver

upgrademgr

vrrp

web_cc

wms

<cr>

Description

This command displays the availability of used and available memory on Mobility Master, or include a process name to show memory information for a process on the AP or Mobility Master.

Syntax

Parameter

Description

aaa

Displays memory information for the AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. process.

amon_recvr

Displays the memory information for the amon_recvr process.

amon_sender

Displays the memory information for the amon_sender process

ap

Displays memory information for a process running on a specific AP or BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

ble_daemon: Displays the memory information for the ble_daemon process.

lldpd: Displays the memory information for the LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. process.

meshd: Displays the memory information for the meshd process.

ofald: Displays the memory information for the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Agent Lite Daemon process.

rapper: Displays the memory information for the rapper process.

rfd: Displays the memory information for the rfd process.

sapd: Displays the memory information for the sapd process.

stm: Displays the memory information for the AP stm process.

wcd: Displays the memory information for the AP wcd process.

apprf

Displays the memory information for the AppRF process.

arci-cli-helper

Displays the memory information for the arci-cli-helper process.

arm

Displays the memory information for the ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. process.

auth

Displays the memory information for the authentication process.

ble_relay

Displays the memory information for the ble relay process.

certmgr

Displays the memory information for the certmgr process.

cfgdist

Displays the memory information for the cfgdist process.

cfgm

Displays the memory information for the cfgm process.

cli

Displays the memory information for the cli process.

cluster_mgr

Displays the memory information for the cluster_mgr process.

cpsec

Displays the memory information for the cpsec process.

ctrlmgmt

Displays the memory information for the ctrlmgmt process.

dbsync

Displays the memory information for the dbsync process.

dds

Displays the memory information for dds process.

debug

Displays detailed memory information to debug memory errors.

dhcpd

Displays the memory information for the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  process.

dhcpdwrap

Displays the memory information for the dhcpdwrap process.

ecc

Displays the DRAM ecc counters.

fpapps

Displays the memory information for the fpapps process.

fw_visibility

Displays the memory information for the fw_visibility process.

gsmmgr

Displays the memory information for gthe smmgr process.

ha_mgr

Displays the memory information for the HA_MGR process.

ip_flow_export

Displays the memory information for the ip flow export process.

isakmpd

Displays the memory information for the isakmpd process.

l2tpd

Displays the memory information for the l2tpd process.

lagm

Displays the memory information for the lagm process.

licensemgr

Displays the memory information for the licensemgr process.

lldpd

Displays the memory information for the lldpd process.

mdns

Displays the memory information for the mDNSMulticast Domain Name System. mDNS provides the ability to perform DNS-like operations on the local link in the absence of any conventional unicast DNS server. The mDNS protocol uses IP multicast User Datagram Protocol (UDP) packets, and is implemented by the Apple Bonjour and Linux NSS-mDNS services. mDNS works in conjunction with DNS Service Discovery (DNS-SD), a companion zero-configuration technique specified. See RFC 6763. process.

mobileip

Displays the memory information for the mobileip process.

mon_serv

Displays the memory information for the mon_serv process.

ofa

Displays the memory information for the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Agent process.

ospf

Displays the memory information for the OSPFOpen Shortest Path First. OSPF is a link-state routing protocol for IP networks. It uses a link-state routing algorithm and falls into the group of interior routing protocols that operates within a single Autonomous System (AS). process.

phonehome

Displays the memory information for the phonehome process.

pim

Displays the memory information for the pim process.

pptpd

Displays the memory information for the pptpd process.

profmgr

Displays the memory information for the profmgr process.

rtpa

Displays the memory information for the rtpa process.

slb

Displays the memory information for the slb process.

snmpd

Displays the memory information for the snmpd process.

stm

Displays the memory information for the stm process.

syslogdwrap

Displays the memory information for the syslogdwrap process.

ucm

Displays the memory information for the UCM process.

udbserver

Displays the memory information for the udbserver process.

upgrademgr

Displays the memory information for the upgrademgr process.

vrrp

Displays the memory information for the vrrp process.

web_cc

Displays the memory information for the WebCC process.

wms

Displays the memory information for the WMS process.

Usage Guidelines

Include the name of a process to show memory information for that process. Use this command under the supervision of Aruba technical support to help debug process errors.

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The command show memory displays, in Kilobytes, the total memory on Mobility Master, the amount of memory currently being used, and the amount of free memory.

(host) [mynode] #show memory

 

Memory (Kb): total: 256128, used: 162757, free: 93371

 

Include the name of a process to show memory statistics for that process. The example below shows memory statistics for mobileip.

(host) [mynode] #show memory mobileip

 

Type Num Allocs Size Allocs Peak Allocs Peak Size

------ ------------ ------------- ------------- -----------

default 1947 336545 2027 336698

 

PC Allocs Size

---- ------ -----

0x7f6eba49f06b 2 1136

0x7f6eba4b71f2 545 8065

0x7f6eba4d239c 1 20

0x7f6eba4d3556 1 33

0x7f6eba7c5c78 2 640

0x7f6eba9fc057 1 1968

0x7f6eba9fcc1d 1 66160

0x7f6ebb515ac6 1 4816

0x7f6ebc0492d6 585 32760

0x7f6ebc049ec5 543 30408

0x7f6ebc04a6e0 5 280

0x7f6ebc04bae2 36 3744

0x7f6ebc04bb05 36 14704

0x7f6ebc04bd4e 51 1224

0x7f6ebc04be5e 9 288

0x7f6ebc054e3e 22 528

0x7f6ebc0555be 12 480

0x7f6ebc28838d 1 120

0x7f6ebc289b1d 15 1320

0x7f6ebc289cfe 1 1176

0x7f6ebc28aaff 5 440

0x7f6ebc28b654 1 88

0x7f6ebc28b667 1 8192

0x7f6ebca7755a 5 120

0x7f6ebca78679 2 16

0x7f6ebcc8d462 15 660

0x7f6ebcc8d4a2 1 88

0x7f6ebcc941d8 1 6448

0x7f6ebcc946fa 1 41000

0x7f6ebcc94717 1 41000

0x7f6ebcc94baf 1 11263

0x7f6ebcc98ec3 3 14696

0x7f6ebcc9a49f 1 16

0x4137b6 1 64

0x41bdfb 1 41000

0x435200 1 88

0x4358ac 2 272

0x4369f1 3 120

0x436a64 9 288

0x437f3a 3 168

0x45ba3a 3 72

0x45c277 4 288

 

total 336545 336698

 

The output of this command includes the following columns:

Column

Description

Type

The show memory command only shows information for predefined processes, so this column always displays the parameter default.

Num Alloc

Current number of memory allocations.

Size Allocs

Total size of all memory allocations, in bytes.

Peak Allocs

Maximum number of allocations used throughout in the life of the process.

Peak Size

Maximum size of allocations used throughout in the life of the process, in bytes.

PC

Program counter: the address of a memory allocation. (For internal use only)

Allocs

Number of memory allocations at that program counter. (For internal use only)

Size

Size of all memory allocations at that program counter. (For internal use only)

Command History

Release

Modification

ArubaOS 8.5.0.0

The wcd sub-parameter was added.

ArubaOS 8.2.0.0

The lagm and vrrp parameters were added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/