You are here: Home > CLI Commands > Just_CLI_Topics > show mgmt-server

show mgmt-server

show mgmt-server

message-counters process {arm|auth|dhcp|fpapps|fw_visibility|hwmon|mdns|resolver|spectrum stm|ucm|wms}

profile <profile-name>

Description

Displays the message counter information of management server.

Syntax

Parameter

Description

message-counters

Message counter in the recent past.

process {arm|auth|dhcp|fw_visibility|mdns |resolver|spectrum|stm|ucm|wms}

Controller processes:

arm: Advanced Radio Management (ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. )

auth: Authentication

dhcp: DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network. 

fpapps: Layer 2,3 control

fw_visibility: FirewallFirewall is a network security system used for preventing unauthorized access to or from a private network. Visibility

hwmon: Hardware monitor

mdns: AirGroupThe application that allows the end users to register their personal mobile devices on a local network and define a group of friends or associates who are allowed to share them. AirGroup is primarily designed for colleges and other institutions. AirGroup uses zero configuration networking to allow Apple mobile devices, such as the AirPrint wireless printer service and the AirPlay mirroring service, to communicate over a complex access network topology.

resolver: Resolver

spectrum: Spectrum Analysis

stm: Station Management

ucm: Unified Communication Manager

wms: WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. Management System

profile <profile-name> Displays the list of configuration profiles and the details of the specified configuration profiles for the management server.

Example

The output of this command shows the message counter information of the WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. Management System process in the controller.

(host)[node] (config) #show mgmt-server message-counters process wms

 

Message Counter History

-----------------------

Message Number Time Packets Monitored AP Info Monitored AP Stats Monitored STA Info Monitored STA Stats

-------------- ---- ------- ----------------- ------------------ ------------------ -------------------

82 Tue Apr 2 14:56:43 2013 1 0 0 3 3

81 Tue Apr 2 14:56:13 2013 1 14 218 2 67

80 Tue Apr 2 14:55:43 2013 1 0 0 0 2

79 Tue Apr 2 14:55:13 2013 1 0 0 0 2

 

The output of the following command displays the details of the default-amp management configuration profile:

(host)[node] #show mgmt-server profile default-amp

Mgmt Config profile "default-amp" (Predefined (editable))

---------------------------------------------------------

Parameter Value

--------- -----

Stats Enabled

Tag Enabled

Sessions Enabled

Monitored Info Disabled

Monitored Stats Disabled

Misc Enabled

Location Enabled

Voice Info Disabled

Related Commands

Command

Description

mgmt-user

This command configures an administrative user.

mgmt-server

This command configures the management server profile.

Command History

Release

Modification

ArubaOS8.2.0.0

The fpapps and hwmon parameters were added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/