You are here: Home > CLI Commands > Just_CLI_Topics > show master-redundancy

show master-redundancy

show master-redundancy

Description

Display the Mobility Master's redundancy configuration.

Syntax

No parameters.

Example

This example below shows the current master redundancy configuration, including the ID number of the master VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. virtual router and the IP address of the peer managed device for master redundancy.

(host) [mynode] (config) #show master-redundancy

Master redundancy configuration:

VRRP Id 120 current state is MASTER

Peer's IP Address is 10.17.65.117

Peer's IPSEC Key is ********

Related Commands

Command

Description

master-redundancy master-vrrp

This command associates a VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. instance with Mobility Master redundancy.

vrrp

This command configures the VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN..

master-redundancy peer-ip

This command configures the IP address and preshared key or certificate for a redundant Mobility Master on another Mobility Master.

Command History

Version

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/