You are here: Home > CLI Commands > Just_CLI_Topics > show netdestination

show netdestination

show netdestination {ipv4 | ipv6 | <netdestination name>} [verbose]

Description

Displays IPv4 and IPv6 network destination information.

Syntax

Parameter

Description

ipv4

Displays IPv4 network destinations.

ipv6

Displays IPv6 network destinations.

<netdestination name>

Displays the name or IP addresses.

verbose

Prints the netdestination table entries.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

Issue this command to display all netdestination configured on this managed device. The output below displays information for all configured IPv4 and IPv6 netdestinations. To display additional detailed information for an individual netdestinations, include the name of the netdestination at the end of the command.

(host) [mynode] #show netdestination

Name: sep23-ipv4

Destination ID: 34

Position Type IP addr Mask-Len/Range

-------- ---- ------- --------------

1 host 1.1.1.1 32

2 name 0.0.0.8 google.com

The output includes the following parameters:

Parameter

Description

Name

Network destination name.

Destination ID

Network destination ID.

Position

Network destination position.

Type

Network destination type.

IP addr

IP address of the network destination.

Mask-Len/Range

Network destination subnetSubnet is the logical division of an IP network. mask and range. If the netdestination object has a defined domain or host name, that value will appear in the mask-Len or Range column.

Related commands

Command

Description

netdestination

This command configures an alias for an IPv4 network host, subnetwork, or range of addresses.

netdestination6

This command configures an alias for an IPv6 network host, subnetwork, or range of addresses.

Command History

Version

Modification

ArubaOS 8.2.1.0

The Destination ID parameter was added to the output.

ArubaOS 8.2.0.0

The ipv4 and ipv6 parameters were added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

You must have a PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license to configure or view a netdestination.

Enable or Config mode on Mobility Master.

/*]]>*/