You are here: Home > CLI Commands > Just_CLI_Topics > show netservice

show netservice

show netservice [<string>]

Description

Show network services

Syntax

Parameter

Description

<string>

Name of a network service.

Usage guidelines

Issue this command without the optional <string> parameter to view a complete table of network services on the controller. Include the <string> parameter to display settings for a single network service only.

Example

The following example shows the protocol type, ports and application-level gatewayGateway is a network node that allows traffic to flow in and out of the network. (ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. ) for the DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  service.

(host)[mynode] #show netservice svc-dhcp

Services

--------

Name Protocol Ports ALG

---- -------- ----- ---

svc-dhcp udp 67 68

Related Commands

Command

Description

netservice

This command configures an alias for network protocols.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/