You are here: Home > CLI Commands > Just_CLI_Topics > show ntp authentication-keys

show ntp authentication-keys

show ntp authentication-keys

Description

Show information for the NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication key.

Syntax

No parameters.

Example

The following example shows values for the NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication keys—Key ID, Key Type, and the Secret.

(host) [mynode] # show ntp authentication-keys

Key Id Key Type Secret

------ -------- ------

41 sha1 ********

The output of this command includes the following parameters:

Parameter

Description

Key ID

The key identifier used when you configured the NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication key.

Key Type

The key type that you used when you configured the NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication key—md5 or sha1.

Secret

The key value for the MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. /SHA1 hash used when you configured the NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication key.

Related Commands

Command

Description

ntp

Helps configure NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. authentication keys.

Command History

Release

Modification

ArubaOS 8.2.1.0

The output was modified to show the SHA1 key type and secret (in encoded format), when SHA1 authentication is configured.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/