You are here: Home > CLI Commands > Just_CLI_Topics > show ntp peer

show ntp peer

show ntp peer <IPv4/IPv6 Address>

Description

Show NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. peer information.

Syntax

Parameter

Description

<IPv4/IPv6 Address>

IPv4/IPv6 Address of the peer.

Example

The output of this commands shows IPv4 and IPv6 address of the peer.

(host)[mynode]#show ntp peer 2008::2

remote 2008::2, local 2008::1

hmode client, pmode sym_active, stratum 16, precision -20

leap 11, refid [73.78.73.84], rootdistance 0.00000, rootdispersion 0.00262

ppoll 6, hpoll 6, keyid 0, version 4, association 53202

reach 000, unreach 1, flash 0x1620, boffset 0.00000, ttl/mode 0

timer 0s, flags config, bclient

reference time: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000

originate timestamp: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000

receive timestamp: d6186e9b.5723196a Sun, Oct 27 2013 21:03:23.340

transmit timestamp: d6186e9b.5723196a Sun, Oct 27 2013 21:03:23.340

filter delay: 0.00000 0.00000 0.00000 0.00000

0.00000 0.00000 0.00000 0.00000

filter offset: 0.000000 0.000000 0.000000 0.000000

0.000000 0.000000 0.000000 0.000000

filter order: 0 1 2 3

4 5 6 7

offset 0.000000, delay 0.00000, error bound 3.99217, filter error 0.00000

remote host: 2008::2

local interface: 2008::1

time last received: 59s

time until next send: 5s

reachability change: 61s

packets sent: 1

packets received: 1

bad authentication: 0

bogus origin: 0

duplicate: 0

bad dispersion: 1

bad reference time: 0

candidate order: 0

flags: config, bclient

 

(host)[mynode]#show ntp peer 10.20.22.17

remote ::, local ::

hmode client, pmode unspec, stratum 3, precision -23

leap 00, refid [125.62.193.121], rootdistance 0.32069, rootdispersion 0.15305

ppoll 6, hpoll 6, keyid 0, version 4, association 26134

reach 001, unreach 2, flash 0x0400, boffset 0.00113, ttl/mode 0

timer 0s, flags config, bclient

reference time: d6186d7e.c99ed7ba Sun, Oct 27 2013 20:58:38.787

originate timestamp: 00000000.00000000 Wed, Feb 6 2036 22:28:16.000

receive timestamp: d6186e24.f02d3f57 Sun, Oct 27 2013 21:01:24.938

transmit timestamp: d6186e24.f02d3f57 Sun, Oct 27 2013 21:01:24.938

filter delay: 0.00113 0.00000 0.00000 0.00000

0.00000 0.00000 0.00000 0.00000

filter offset: 0.398620 0.000000 0.000000 0.000000

0.000000 0.000000 0.000000 0.000000

filter order: 0 1 2 3

4 5 6 7

offset 0.398620, delay 0.00113, error bound 2.81735, filter error 0.00276

remote host: 10.20.22.17

local interface: 10.16.32.90

time last received: 1s

time until next send: 1s

reachability change: 1s

packets sent: 2

packets received: 1

bad authentication: 0

bogus origin: 0

duplicate: 0

bad dispersion: 0

bad reference time: 0

candidate order: 0

flags: config, bclient, iburst

Usage guidelines

The show ntp peer command is used for NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. server troubleshooting, and should only be used under the supervision of Aruba technical support. Issue the show ntp servers command to view basic settings for currently configured NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network. servers.

Related Commands

Command

Description

ntp

This command configures a Network Time Protocol (NTPNetwork Time Protocol. NTP is a protocol for synchronizing the clocks of computers over a network.) server.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/