You are here: Home > CLI Commands > Just_CLI_Topics > show openflow-profile

show openflow-profile

show openflow-profile

Description

The command displays the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile information configured on the managed device.

Syntax

No parameters.

Example

The following command displays the OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile information on the managed device. Execute the following commands to verify OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile configuration on managed devices:

(host) [md] #show openflow-profile

 

Openflow-profile "default"

--------------------------

Parameter Value

--------- -----

State Enabled

Openflow mode passive

Openflow version v1.3

controller-ip 10.16.125.115:6633

VLAN ID or range(s) of VLAN IDs 1,124,400,600

openflow tls Disabled

certificate-file none

key-file none

ca-certificate-file none

Related Commands

Command

Description

openflow-profile

This command configures OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. profile on the managed device

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config or Enable mode on managed device.

/*]]>*/