You are here: Home > CLI Commands > Just_CLI_Topics > show pan profile

show pan-options

show pan-options

Description

This command displays configured settings for integrating a branch controller with a Palo Alto Networks (PAN) firewallFirewall is a network security system used for preventing unauthorized access to or from a private network..

Syntax

No syntax.

Usage Guidelines

Issue this command to see the connection status of the PAN firewallsFirewall is a network security system used for preventing unauthorized access to or from a private network. associated with the controller.

(host)[node]#show pan profile PAN-Group-1

 

Palo Alto Networks Servers Profile "PAN-Group-1"

------------------------------------------------

Parameter Value

--------- -----

Palo Alto Networks Firewall 1.2.3.4:443 abc/********

Palo Alto Networks Firewall 2.2.2.2:123 2222/********

Palo Alto Networks Firewall 3.3.3.3:333 3333/********

Palo Alto Networks Firewall 1.1.1.1:443 admin/********

Related Commands

Command

Description

pan active-profile

This command selects an active Palo Alto Network (PAN) profile from a set of profiles.

pan profile

This command configures a Palo Alto Networks (PAN) profile to allow a managed device to communicate with a PAN firewallFirewall is a network security system used for preventing unauthorized access to or from a private network..

Command History

 

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or config mode on Mobility Master.

/*]]>*/