You are here: Home > CLI Commands > Just_CLI_Topics > show pan state

show pan state

show pan state

Description

This command shows the current connection status of PAN firewallsFirewall is a network security system used for preventing unauthorized access to or from a private network..

Syntax

No syntax.

Usage Guidelines

Issue this command to see the connection status of the PAN firewallsFirewall is a network security system used for preventing unauthorized access to or from a private network. associated with the controller.

(host)[node] #show pan state

Palo Alto Networks Servers Connection State[PAN-Group-1]

--------------------------------------------------------

Firewalls State

--------- -----

1.2.3.4:443 DOWN

2.2.2.2:123 UP[11/25/13 12:45:49]Established

3.3.3.3:333 UP[11/25/13 12:45:48]Established

1.1.1.1:443 UP[11/25/13 12:45:50]Established

Related Commands

Command

Description

pan active-profile

This command selects an active Palo Alto Network (PAN) profile from a set of profiles.

pan profile

This command configures a Palo Alto Networks (PAN) profile to allow a managed device to communicate with a PAN firewallFirewall is a network security system used for preventing unauthorized access to or from a private network..

Command History

 

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or config mode on Mobility Master.

/*]]>*/