You are here: Home > CLI Commands > Just_CLI_Topics > show papi-security

show papi-security

show papi-security

Description

This command shows a configured papi-security profile.

Syntax

Parameter

Description

Range

Default

PAPI Key

The key string. The key authenticates the messages between systems.

Range: 10–64 characters

Enhanced security mode

Indicates if the enhanced security mode is enabled or disabled. This mode causes the system to reject messages when an incorrect key is used.

disabled

Usage Guidelines

Execute this command to show the selected papi-security profile configuration. The papi-security command is used to enforce advanced security options and provides an enhanced level of security.

The Parameter column displays the PAPIProcess Application Programming Interface. PAPI controls channels for ARM and Wireless Intrusion Detection System (WIDS) communication to the master controller. A separate PAPI control channel connects to the local controller where the SSID tunnels terminate. Key and Enhanced security mode parameters. The Value column displays a Papi key value (encrypted) and indicates whether the Enhanced security mode is enabled or disabled.

(host)[mynode] #show papi-security

 

PAPI Security Profile

---------------------

Parameter Value

--------- -----

PAPI Key ********

Enhanced security mode Enabled

Related Commands

Command

Description

papi-security

This command enforces advanced security options and provides an enhanced level of security.

Command History

Release

Modification

ArubaOS 8.0.1 .0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/