You are here: Home > CLI Commands > Just_CLI_Topics > show packet-capture-defaults

show packet-capture-defaults

show packet-capture-defaults

Description

Displays the status of default packet capture options.

Syntax

No parameters.

Example

The output of this command shows packet capture status.

(host) # show packet-capture-defaults

 

Current Active Packet Capture Actions(current switch)

=====================================================

Packet filtering for TCP ports disabled.

Packet filtering for UDP ports disabled.

Packet filtering for internal messaging opcodes disabled.

Packet filtering for all other packets disabled.

 

 

Packet Capture Defaults(across switches and reboots if saved)

============================================================

Packet filtering for TCP ports disabled.

Packet filtering for UDP ports disabled.

Packet filtering for internal messaging opcodes disabled.

Packet filtering for all other packets disabled.

Related Commands

Command

Description

packet-capture

This command enables or disables packet capturing and sets packet capturing options for a single packet capture session.

packet-capture-defaults

This command enables or disables packet capturing and defines a set of default packet capturing options on the control path for debugging purposes.

ap packet-capture

These commands manage WiFi packet capture (PCAP) on Aruba APs. The WiFi packets are encapsulated in a UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. header and sent to a client running a packet analyzer like Wildpacket’s Airopeek, Omnipeek, or Wireshark.

no packet-capture

This command disables packet capturing for debugging.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/