You are here: Home > CLI Commands > Just_CLI_Topics > show port stats

show port stats

show port stats [<slot/module/port>]

Description

Displays the activity statistics on each of the port on the controller.

Syntax

Parameter

Description

<slot/module/port>

Physical port in <slot>/<module>/<port> format.

Example

The output of this command shows the link status on all ports in the controller.

(host)[mynode] # show port stats

 

Port Statistics

---------------

Port PacketsIn PacketsOut BytesIn BytesOut InputErrorBytes OutputErrorBytes CRCErrors

---- --------- ---------- ------- -------- --------------- ---------------- ---------

GE 0/0/0 745969 18810 86791364 10599122 0 0 0

GE 0/0/1 0 0 0 0 0 0 0

GE 0/0/2 0 0 0 0 0 0 0

GE 0/0/3 0 0 0 0 0 0 0

GE 0/0/4 0 0 0 0 0 0 0

GE 0/0/5 0 0 0 0 0 0 0

The output of this command includes the following parameters:

Parameter

Description

Port

Displays the physical port on the controller.

PacketIn

Indicates the total number of incoming packets to the port.

PacketOut

Indicates the total number of outgoing packets from the port.

BytesIn

Indicates the total number of incoming data (in bytes) to the port.

BytesOut

Indicates the total number of outgoing data (in bytes) from the port.

InputErrorBytes

Indicates input error bytes on the port.

OutputErrorBytes

Indicates the output error bytes on the port.

CRCErrors

Indicates the Cyclic Redundancy Check (CRCCyclic Redundancy Check. CRC is a data verification method for detecting errors in digital data during transmission, storage, or retrieval. ) errors on the port.

Related Commands

Command

Description

show port status

This command displays the status of all ports on the controller.

show port link-event

This command displays the link status on each of the port on the controller.

show port trusted

This command displays the list of ports configured with trusted profiles.

show port xsec

This command displays the list of xSec enabled ports.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/