You are here: Home > CLI Commands > Just_CLI_Topics > show port status

show port status

show port status [<slot/module/port>]

Description

Displays the status of all ports on the controller.

Syntax

Parameter

Description

<slot/module/port>]

Physical port in <slot>/<module>/<port> format.

Example

The output of this command shows the status of all ports in the controller.

(host)[mynode]# show port status

 

Port Status

-----------

Slot-Port PortType AdminState OperState PoE Trusted SpanningTree PortMode

--------- -------- ---------- --------- --- ------- ------------ --------

0/0/0 GE Enabled Up N/A Yes Forwarding Access

0/0/1 GE Enabled Down N/A Yes Disabled Access

0/0/2 GE Enabled Down N/A Yes Disabled Access

0/0/3 GE Enabled Down N/A Yes Disabled Access

0/0/4 GE Enabled Down N/A Yes Disabled Access

0/0/5 GE Enabled Down N/A Yes Disabled Access

 

Speed Duplex

----- ------

1 Gbps Full

Auto Auto

Auto Auto

Auto Auto

Auto Auto

Auto Auto

The output of this command includes the following parameters:

Parameter

Description

Slot-Port

Physical port in <slot>/<module>/<port> format.

PortType

Displays the type of physical port.

FE: Fast EthernetEthernet is a network protocol for data transmission over LAN.

GE: Gigabit EthernetEthernet is a network protocol for data transmission over LAN.

PC: Port Channel

AdminState

Indicates if the physical port is enabled or disabled.

OperState

Indicates if the current status of the physical port is up or down.

PoE

Indicates if the physical port is Power over EthernetEthernet is a network protocol for data transmission over LAN. (PoEPower over Ethernet. PoE is a technology for wired Ethernet LANs to carry electric power required for the device in the data cables. The IEEE 802.3af PoE standard provides up to 15.4 W of power on each port.) enabled.

Trusted

Indicates if the physical port is trusted.

SpanningTree

Indicates the state of spanning tree.

PortMode

Indicates the port mode of the physical port.

Speed

Indicates the port speed.

Duplex

Indicates the direction of traffic.

Related Commands

Command

Description

show port stats

This command displays the activity statistics on each of the port on the controller.

show port link-event

This command displays the link status on each of the port on the controller.

show port trusted

This command displays the list of ports configured with trusted profiles.

show port xsec

This command displays the list of xSec enabled ports.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/