You are here: Home > CLI Commands > Just_CLI_Topics > show priority-map

show priority-map

show priority-map

Description

Displays the list of priority maps on a interface.

Syntax

No parameters.

Example

The output of this command shows the priority maps configured on all interfaces.

(host)[node] # show priority-map

 

Priority Map

-------------

ID Name DSCP-TOS DOT1P-COS

-- ---- -------- ---------

1 my-map 4-20,60 4-7

Related Commands

Command

Description

priority-map

This command configures the ToSType of Service. The ToS field is part of the IPv4 header, which specifies datagrams priority and requests a route for low-delay, high-throughput, or a highly reliable service. and CoSClass of Service. CoS is used in data and voice protocols for classifying packets into different types of traffic (voice, video, or data) and setting a service priority. For example, voice traffic can be assigned a higher priority over email or HTTP traffic. values used to map traffic into high priority queues.

interface gigabitethernet

This command configures a GigabitEthernet interface.

Command History

 

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/