You are here: Home > CLI Commands > Just_CLI_Topics > show profile-list ap

show profile-list ap

show profile-list ap [ enet-link-profile | mesh-cluster-profile |

mesh-ht-ssid-profile | mesh-radio-profile | regulatory-domain-profile |

snmp-profile | snmp-user-profile | system-profile | wired-ap-profile ]

Description

Displays the list of AP profiles.

Syntax

Parameter

Description

enet-link-profile

Display a list of AP EthernetEthernet is a network protocol for data transmission over LAN. link profiles.

mesh-cluster-profile

Display a list of mesh cluster profiles used by mesh nodes.

mesh-ht-ssid-profile

Display a list of mesh high-throughput SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profiles used by mesh nodes.

mesh-radio-profile

Display a list of mesh radio profiles used by mesh nodes.

multizone-profile

Display a list of all AP MultiZone profile.

regulatory-domain-profile

Display a list of AP regulatory profiles.

snmp-profile

Display a list of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  profiles.

snmp-user-profile

Display a list of SNMPv3Simple Network Management Protocol version 3. SNMPv3 is an enhanced version of SNMP that includes security and remote configuration features. user profiles.

system-profile

Display a list of AP system profiles.

wired-ap-profile

Display a list of wired AP profiles.

Example

The output of this command shows list of profiles that are invalid and also displays the error in those profiles.

(host)[mynode] # show profile-list aaa authentication captive-portal

 

Captive Portal Authentication Profile List

------------------------------------------

Name References Profile Status

---- ---------- --------------

default 1

Related Commands

Command

Description

ap system-profile

This command configures an AP system profile.

Command History

 

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/