You are here: Home > CLI Commands > Just_CLI_Topics > show processes monitor stats

show processes monitor stats

show processes monitor statistics

Description

Displays the current status of all the processes running under the process monitor watchdog.

Syntax

No parameters.

Example

A partial example of the output of this command is shown below:

(host) [mynode] (config) #show process monitor statistics

 

Process Monitor Statistics

--------------------------

Name State Restarts Timeout Value Timeout Chances

---- ----- -------- ------------- ---------------

/mswitch/bin/arci-cli-helper PROCESS_RUNNING 0 120 3

/mswitch/bin/fpcli PROCESS_RUNNING 0 120 3

/mswitch/bin/packet_filter PROCESS_RUNNING 0 120 3

/mswitch/bin/certmgr PROCESS_RUNNING 0 120 3

/mswitch/bin/dbstart PROCESS_RUNNING 0 120 3

/mswitch/bin/cryptoPOST PROCESS_RUNNING 0 120 3

/mswitch/bin/sbConsoled PROCESS_RUNNING 0 120 3

/mswitch/bin/pubsub PROCESS_RUNNING 0 120 3

/mswitch/bin/cfgm PROCESS_RUNNING 0 120 3

/mswitch/bin/syslogdwrap PROCESS_RUNNING 0 120 3

/mswitch/bin/aaa PROCESS_RUNNING 0 120 3

/mswitch/bin/fpapps PROCESS_RUNNING 0 120 3

/mswitch/bin/pim PROCESS_RUNNING 0 120 3

/mswitch/bin/lic

Related Commands

Command

Description

process restart

This command restarts a process and optionally creates a core file.

process monitor

The process monitor validates the integrity of processes every 120 seconds. If a process does not respond during three consecutive 120-second timeout intervals, that process is flagged as nonresponsive and the process monitor will create a log message, restart the process or reboot the managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/