You are here: Home > CLI Commands > Just_CLI_Topics > show references ap

show references ap

show references ap

am-filter-profile {default | <profile-name>}

authorization-profile {default | <profile-name>}

deploy-profile {page | start}

enet-link-profile {default | <profile-name>}

general-profile

lldp

med-network-policy-profile {default | <profile-name>}

profile

mesh-cluster-profile {default | <profile-name>}

mesh-ht-ssid-profile {default | <profile-name>}

mesh-radio-profile {default | <profile-name>}

multizone-profile {default | <profile-name>}

provisioning-profile {default | <profile-name>}

regulatory-domain-profile {default | <profile-name>}

spectrum local-overridead

system-profile {default | <profile-name>}

wired-ap-profile {default | <profile-name>}

wired-port-profile

[page <page>] [start <start>]

Description

This command shows the number of references to a specific AP profile.

Syntax

Parameter

Description

Default

am-filter-profile

<profile-name>

Shows references to an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter.

default

authorization-profile

<profile-name>

Shows references to an AP Authorization profile.

default

deploy-profile

Show references to the AP deploy-profile.

 

enet-link-profile

<profile-name>

Shows AP groups that include a references to this EthernetEthernet is a network protocol for data transmission over LAN. link profile.

default

general-profile

Shows references to the ap general-profile.

 

lldp

Shows references to the Link-layer Discovery Protocol profile.

 

med-network-policy-profile <profile-name>

Shows references to LLDP-MEDLLDP–Media Endpoint Discovery. LLDP-MED facilitates information sharing between endpoints and network infrastructure devices. Network Policy profile of an AP.

 

profile

Shows references to an AP LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile.

 

mesh-cluster-profile

<profile-name>

Shows AP groups that include a references to this mesh cluster profile.

default

mesh-ht-ssid-profile

<profile-name>

Shows AP groups that include a references to this mesh high-throughput SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profile.

default

mesh-radio-profile

<profile-name>

Shows AP groups that include a references to this mesh radio profile.

default

multizone <profile-name>

Shows references to an AP MultiZone profile.

default

provisioning-profile

<profile-name>

Shows references to a Provisioning profile.

default

regulatory-domain-profile

<profile-name>

Shows AP groups that include a references to this regulatory domain profile.

default

spectrum local-override

Shows references to the Spectrum Local Override Profile.

 

system-profile

<profile-name>

Shows AP groups that include a references to this system profile.

default

wired-ap-profile

<profile-name>

Shows AP groups that include a references to this wired AP profile.

default

wired-port-profile
<profile-name>

Shows references to an AP wired port profile

default

page <page>

Include this optional parameter to limit output of this command to the specified number of items.

 

start <start>

Include this optional parameter to start displaying the output of this command at the specified index number.

 

Example

The example below shows that 10 different AP groups include links to the AP EthernetEthernet is a network protocol for data transmission over LAN. link profile Default. These 10 AP groups reference the Default EthernetEthernet is a network protocol for data transmission over LAN. link profile for both their EthernetEthernet is a network protocol for data transmission over LAN. 0 and EthernetEthernet is a network protocol for data transmission over LAN. 1 interfaces, for a total of 20 references altogether.

(host)[mynode] #show references ap enet-link-profile default

 

References to AP Ethernet Link profile "default"

------------------------------------------------

Referrer Count

-------- -----

ap-group "10.0.0" enet0-profile 1

ap-group "10.0.0" enet1-profile 1

ap-group "corp" enet0-profile 1

ap-group "corp" enet1-profile 1

ap-group "Corp_AM_Ch1" enet0-profile 1

ap-group "Corp_AM_Ch1" enet1-profile 1

ap-group "Corp_AM_Ch6" enet0-profile 1

ap-group "Corp_AM_Ch6" enet1-profile 1

ap-group "corpTest" enet0-profile 1

ap-group "corpTest" enet1-profile 1

ap-group "default" enet0-profile 1

ap-group "default" enet1-profile 1

ap-group "India_Local" enet0-profile 1

ap-group "India_Local" enet1-profile 1

ap-group "ops" enet0-profile 1

ap-group "ops" enet1-profile 1

ap-group "voip-test" enet0-profile 1

ap-group "voip-test" enet1-profile 1

ap-group "voip-test-nokia" enet0-profile 1

ap-group "voip-test-nokia" enet1-profile 1

Total References:20

Related Commands

Command

Description

ap am-filter-profile

Configures an AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. filter.

ap authorization-profile

Defines a temporary configuration profile for remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. that are not yet authorized on the network.

ap deploy-profile

Configures an AP deployment profile.

ap enet-link-profile

Configures an AP EthernetEthernet is a network protocol for data transmission over LAN. link profile.

ap general-profile

Configures the general profile of an AP.

ap lldp profile

Defines an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. profile that specifies the type-length-value (TLVType-length-value or Tag-Length-Value. TLV is an encoding format. It refers to the type of data being processed, the length of the value, and the value for the type of data being processed.) elements to be sent in LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. PDUs.

ap lldp med-network-policy-profile

Defines an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. MED network policy profile that defines DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. values and L2 priority levels for a voice or video application.

ap mesh-cluster-profile

Configures a mesh cluster profile used by mesh nodes.

ap mesh-ht-ssid-profile

Configures a mesh high-throughput SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network. profile used by mesh nodes.

ap mesh-radio-profile

Configures a mesh radio profile used by mesh nodes.

ap multizone-profile

Attaches the profile to ap-group or ap-name.

ap provisioning-profile

Defines a provisioning profile for an AP or group of APs.

ap regulatory-domain-profile

Configures an AP regulatory domain profile.

ap spectrum local-override

Converts an AP or AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. into a spectrum monitor by adding it to the spectrum local-override list.

ap system-profile

Configures an AP system profile.

ap wired-ap-profile

Configures a wired AP profile.

ap wired-port-profile

Configures a wired port profile.

Command History

Release

Modification

ArubaOS 8.2.0.0

The ap deploy-profile parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/