You are here: Home > CLI Commands > Just_CLI_Topics > show references rf

show references rf

crypto-local

show references rf

dot11a-radio-profile <profile-name>

dot11g-radio-profile <profile-name>

event-thresholds-prof <profile-name>

ht-radio-profile <profile-name>

optimization-profile <profile-name>

Description

Show RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. profile references.

Syntax

Parameter

Description

dot11a-radio-profile

Show references to a 802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. radio profile.

dot11g-radio-profile

Show references to a 802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. radio profile.

event-thresholds-prof

Show references to an RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. Event Thresholds Profile.

ht-radio-profile

Show references to a High-throughput radio profile.

optimization-profile

Show references to an RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. Optimization Profile.

Related Commands

Related Command

Description

rf arm-profile

This command configures the Adaptive Radio Management (ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. ) profile.

Command History

 

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/