You are here: Home > CLI Commands > Just_CLI_Topics > show rf am-scan-profile

show rf am-scan-profile

show rf am-scan-profile [<profile-name>]

Description

Display the AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode. scanning profile list. Optionally display parameter and values of a specified Air Monitor profile.

Syntax

Parameter

Description

<profile-name>

Name of this instance of the profile.

Usage Guidelines

Enter the basic show command to view a list of profiles, the number of profiles and the profile status. For example:

(host) [mynode]#show rf am-scan-profile

 

AM Scanning profile List

------------------------

Name References Profile Status

---- ---------- --------------

default 9

north 0

 

Total:2

Example

In the example above, their are two profile names; default and north. The Reference column indicates the number of references to this profile name. The Profile Status column is blank unless the profile is predefined.

Optionally, you can enter a profile name to view the parameters for that profile. For example:

(host) [mynode]#show rf am-scan-profile default

 

AM Scanning profile "default"

-----------------------------

Parameter Value

--------- -----

Scan Mode all-reg-domain

Dwell time: Active channels 500

Dwell time: Regulatory Domain channels 250

Dwell time: non-Regulatory Domain channels 200

Dwell time: Rare channels 100

The explanation of the display output is described in the table below.

Parameter

Description

Scan-mode

The scanning mode for the radio

all-reg-domain

Scan channels in all regulatory domain

rare

Scan all channels (all regulatory domains and rare channels)

reg-domain

Scan channels in the APs regulatory domain

Dwell time: Active channels

Dwell time (in ms) for channels where there is wireless activity

Dwell time: Regulatory Domain channels

Dwell time (in ms) for AP's Regulatory domain channels

Dwell time: non-Regulatory Domain channels

Dwell time (in ms) for channels not in the APs regulatory domain

Dwell time: Rare channels

Dwell time (in ms) for rare channels

Related Commands

Related Command

Description

rf am-scan-profile

This command configures an Air Monitor (AMAir Monitor. AM is a mode of operation supported on wireless APs. When an AP operates in the Air Monitor mode, it enhances the wireless networks by collecting statistics, monitoring traffic, detecting intrusions, enforcing security policies, balancing wireless traffic load, self-healing coverage gaps, and more. However, clients cannot connect to APs operating in the AM mode.) scanning profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/