You are here: Home > CLI Commands > Just_CLI_Topics > show rf event-thresholds-profile

show rf event-thresholds-profile

show rf event-thresholds-profile [<profile>]

Description

Show an Event Thresholds profile.

Syntax

Parameter

Description

<profile>

name of an Event Thresholds profile

Usage Guidelines

Issue this command without the <profile> parameter to display the entire Event Thresholds profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has two configured Event Thresholds profiles. The References column lists the number of other profiles with references to the Event Thresholds profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column

(host)[mynode]# show rf event-thresholds-profile

 

RF Event Thresholds Profile List

--------------------------------

Name References Profile Status

---- ---------- --------------

default 6

event1 2

 

Total: 2.

This example displays the configuration settings for the profile default.

(host)[mynode]# show rf event-thresholds-profile default

RF Event Thresholds Profile "default"

-------------------------------------

Parameter Value

--------- -----

Detect Frame Rate Anomalies Disabled

Bandwidth Rate High Watermark 0 %

Bandwidth Rate Low Watermark 0 %

Frame Error Rate High Watermark 0 %

Frame Error Rate Low Watermark 0 %

Frame Fragmentation Rate High Watermark 16 %

Frame Fragmentation Rate Low Watermark 8 %

Frame Low Speed Rate High Watermark 16 %

Frame Low Speed Rate Low Watermark 8 %

Frame Non Unicast Rate High Watermark 0 %

Frame Non Unicast Rate Low Watermark 0 %

Frame Receive Error Rate High Watermark 16 %

Frame Receive Error Rate Low Watermark 8 %

Frame Retry Rate High Watermark 16 %

Frame Retry Rate Low Watermark 8 %

The output of this command includes the following parameters:

Parameter

Description

Detect Frame Rate Anomalies

Shows of the profile enables or disables detection of frame rate anomalies.

Bandwidth Rate High Watermark

If bandwidth in an AP exceeds this value, it triggers a bandwidth exceeded condition. The value represents the percentage of maximum for a given radio. (For 802.11b802.11b is a WLAN standard often called Wi-Fi and is backward compatible with 802.11. Instead of the Phase-Shift Keying (PSK) modulation method used in 802.11 standards, 802.11b uses Complementary Code Keying (CCK) that allows higher data speeds and makes it less susceptible to multipath-propagation interference. 802.11b operates in the 2.4 GHz band and the maximum data transfer rate is 11 Mbps., the maximum bandwidth is 7 MbpsMegabits per second. For 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. a and g, the maximum is 30 MbpsMegabits per second.) The recommended value is 85%.

Bandwidth Rate Low Watermark

If an AP triggers a bandwidth exceeded condition, the condition persists until bandwidth drops below this value.

Frame Error Rate High Watermark

If the frame error rate (as a percentage of total frames in an AP) exceeds this value, it triggers a frame error rate exceeded condition.

Frame Error Rate Low Watermark

If an AP triggers a frame error rate exceeded condition, the condition persists until the frame error rate drops below this value.

Frame Fragmentation Rate High Watermark

If the frame fragmentation rate (as a percentage of total frames in an AP) exceeds this value, it triggers a frame fragmentation rate exceeded condition.

Frame Fragmentation Rate Low Watermark

If an AP triggers a frame fragmentation rate exceeded condition, the condition persists until the frame fragmentation rate drops below this value.

Frame Low Speed Rate High Watermark

If the rate of low-speed frames (as a percentage of total frames in an AP) exceeds this value, it triggers a low-speed rate exceeded condition.

Frame Low Speed Rate Low Watermark

After a low-speed rate exceeded condition exists, the condition persists until the percentage of low-speed frames drops below this value.

Frame Non Unicast Rate High Watermark

If the non-unicast rate (as a percentage of total frames in an AP) exceeds this value, it triggers a non-unicast rate exceeded condition. This value depends upon the applications used on the network.

Frame Non Unicast Rate Low Watermark

If an AP triggers a non-unicast rate exceeded condition, the condition persists until the non-unicast rate drops below this value.

Frame Receive Error Rate High Watermark

If the frame receive error rate (as a percentage of total frames in an AP) exceeds this value, it triggers a frame receive error rate exceeded condition.

Frame Receive Error Rate Low Watermark

If an AP triggers a frame receive error rate exceeded condition, the condition persists until the frame receive error rate drops below this value.

Frame Retry Rate High Watermark

If the frame retry rate (as a percentage of total frames in an AP) exceeds this value, it triggers a frame retry rate exceeded condition.

Frame Retry Rate Low Watermark

If an AP triggers a frame retry rate exceeded condition exists, the condition persists until the frame retry rate drops below this value.

Related Commands

Related Command

Description

rf event-thresholds-profile

This command configures the event thresholds profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/