You are here: Home > CLI Commands > Just_CLI_Topics > show rf spectrum-profile

show rf spectrum-profile

rf spectrum-profile <profile-name>

Description

Show a spectrum profile used by the spectrum analysis feature.

Syntax

Parameter

Description

<profile>

Name of a spectrum profile.

Usage Guidelines

Issue this command without the <profile>parameter to display the entire spectrum profile list, including profile status and the number of references to each profile. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has three configured spectrum profiles. The References column lists the number of other profiles with references to the spectrum profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host)[mynode]#show rf spectrum-profile

 

Spectrum profile List

---------------------

Name References Profile Status

---- ---------- --------------

spectrum1  1

default-a 2 Predefined (editable)

default-g 2 Predefined (editable)

This example displays the configuration settings for the profile spectrum1.

(host)[mynode]#show rf spectrum-profile default

 

Spectrum profile "default"

--------------------------

Parameter Value

--------- -----

Age Out: WIFI 600 sec

Age Out: Generic Interferer 30 sec

Age Out: Microwave 15 sec

Age Out: Microwave (Inverter type) 15 sec

Age Out: Video Device 60 sec

Age Out: Audio Device 10 sec

Age Out: Cordless Phone Fixed Frequency 10 sec

Age Out: Generic Fixed Frequency 10 sec

Age Out: Bluetooth 25 sec

Age Out: Xbox 25 sec

Age Out: Cordless Network Frequency Hopper 60 sec

Age Out: Cordless Base Frequency Hopper 240 sec

Age Out: Generic Frequency Hopper 25 sec

The output of this command includes the following information:

Parameter

Description

Age Out: WIFI

The number of seconds for which a wifi device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 600 seconds.

Age Out: Generic Interferer

The number of seconds for which an unknown device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 30 seconds.

Age Out: Microwave

The number of seconds for which a microwaveElectromagnetic energy with a frequency higher than 1 GHz, corresponding to wavelength shorter than 30 centimeters. device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 15 seconds.

Note that this parameter is applicable to 2.4GHz spectrum monitor radios only.

Age Out: Microwave (inverter type)

The number of seconds for which an inverter microwaveElectromagnetic energy with a frequency higher than 1 GHz, corresponding to wavelength shorter than 30 centimeters. must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 15 seconds.

Note that this parameter is applicable to 2.4GHz spectrum monitor radios only.

Age Out: Video Device

The number of seconds for which a video device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 60 seconds.

Age Out: Audio Device

The number of seconds for which an audio device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 10 seconds.

Age Out: Cordless Phone Fixed Frequency

The number of seconds for which a fixed frequency cordless phone must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 10 seconds.

Age Out: Generic Fixed Frequency

The number of seconds for which a generic fixed frequency device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 10 seconds.

Age Out: Xbox

The number of seconds for which an Xbox device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 25 seconds.

Note that this parameter is applicable to 2.4GHz spectrum monitor radios only.

Age Out: Bluetooth

The number of seconds for which a bluetooth device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 25 seconds.

Note that this parameter is applicable to 2.4GHz spectrum monitor radios only.

Age Out: Cordless Network Frequency Hopper

The number of seconds for which a frequency-hopping cordless network device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 60 seconds.

Age Out: Cordless Base Frequency Hopper

The number of seconds for which a frequency-hopping cordless phone base must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 240 seconds.

Age Out: Generic Frequency Hopper

The number of seconds for which a generic frequency-hopping device must stop sending a signal before the spectrum monitor considers that device no longer active on the network. The default value is 25 seconds.

Related Commands

Command

Description

rf spectrum-profile

This command configures the RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. spectrum profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/