You are here: Home > CLI Commands > Just_CLI_Topics > show rft profile

show rft profile

show rft profile {all|ht-link-quality|link-quality|raw}

Description

Show parameters for the predefined RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. test profiles.

Syntax

Parameter

Description

all

Show all predefined profiles.

ht-link-quality

Show configured parameters for the predefined HT Link Quality test profile.

link-quality

Show configured parameters for the predefined Link Quality test profile.

raw

Show configured parameters for the predefined RAW test profile.

Usage guidelines

The rft command is used for RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. troubleshooting, and should only be used under the supervision of Aruba technical support. Issue the show rft profile command to view the profiles used for these RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. tests.

Example

The following example shows the testing parameters for the predefined link-quality RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. test profile.

 

(host) #show rft profile link-quality

 

Profile LinkQuality: Built-in profile

--------------------------------------

Parameter Value

--------- -----

Antenna 1 and/or 2

Frame Type Null Data

Num Packets 100 for each data-rate

Packet Size 1500

Num Retries 0

Data Rate All rates are tried

Related Commands

Command

Description

show rft result

Shows the results of an RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. test.

Command History

Release

Modification

ArubaOS 8.2.0.0

The ht-link-quality parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system

Enable and Config mode on Mobility Master and managed device.

/*]]>*/