You are here: Home > CLI Commands > Just_CLI_Topics > show rft transactions

show rft transactions

show rft transactions

Description

Show transaction IDs of RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. tests.

Syntax

No parameters.

Usage guidelines

The rft command is used for RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. troubleshooting, and should only be used under the supervision of Aruba technical support. Issue the show rft transaction command to view the transaction IDs for the most recent test of each test type.

Example

The following example shows the transaction IDs for the latest RAW, link-quality and antenna-connectivity tests.

(host) [mynode] #show rft transactions

 

RF troubleshooting transactions

-------------------------------

Profile Transaction ID

------- --------------

RAW 2001

LinkQuality 2101

AntennaConnectivity 1801

Related Commands

Command

Description

rft

This command is used for RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. troubleshooting.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/