You are here: Home > CLI Commands > Just_CLI_Topics > show rrm dot11k beacon-report

show rrm dot11k beacon-report

show rrm dot11k beacon-report

Description

Displays the beacon report information sent by a client to its AP.

Syntax

No parameters.

Example

The output of this command shows the beacon report for the client 00:1f:6c:7a:d4:fd.

(host) [mynode]# show rrm dot11k beacon-report station-mac 00:1f:6c:7a:d4:fd

 

802.11K Beacon Report Details

 

--------------------------------------------------

 

Channel BSSID Reg Class Antenna ID Meas. Mode

---------- ------- ------------ ------------- ----------------

1 00:0b:86:6d:3e:40 0 1 Bcn Table

 

Num Elements:1

Related Commands

Related Command

Description

wlan rrm-ie-profile

This command configures a radio resource management (RRM) IE profile to define the information elements advertised by an AP with 802.11k802.11k is an IEEE standard that enables APs and client devices to discover the best available radio resources for seamless BSS transition in a WLAN. support enabled.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/