You are here: Home > CLI Commands > Just_CLI_Topics > show running-config

show running-config

show running-config

Description

Displays the current Mobility Master configuration, including all pending changes that are yet to be saved.

Syntax

No parameters.

Usage Guidelines

Use this command to see the complete running and pending configuration on the Mobility Master.

Example

The output of this command shows the running configuration on the controller.

(host) [mynode] #show running-config

Building Configuration...

 

version 8.0

hostname "host"

clock timezone PST -8

!

location "Building1.floor1"

controller config 59

crypto-local pki ServerCert default-self-signed default-self-signed

crypto-local pki PublicCert master-ssh-pub-cert master-ssh-pub-cert

ip NAT pool dynamic-srcnat 0.0.0.0 0.0.0.0

ip access-list eth name2

!

ip access-list mac name

!

ip access-list eth etherypte

deny 0x0

!

ip access-list eth validuserethacl

permit any

...

...

...

snmp-server enable trap

snmp-server trap source 0.0.0.0

process monitor log

nbapi_publish

end

The output of this command shows the running configuration of the management server profiles.

(host) [mynode] #show running-config | include mgmt

Building Configuration...

interface mgmt

mgmt-server primary-server 40.40.40.1 profile default-amp transport udp secure

mgmt-server primary-server 2001::2 profile default-amp transport udp secure

mgmt-server primary-server 10.1.1.11 profile default-amp transport udp

mgmt-server primary-server 20.16.11.1 profile default-ale transport udp

Command History

Version

Modification

ArubaOS 8.1.0.0

Listed primary servers with IPv6 address.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/