You are here: Home > CLI Commands > Just_CLI_Topics > show snmp inform

show snmp inform

show snmp inform

Description

Displays the length of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  inform queue.

Syntax

No parameters.

Example

The output of this command shows slot details on the controller.

(host) # show snmp inform stats

 

Inform queue size is 100

 

SNMP INFORM STATS

-----------------

HOST PORT INFORMS-INQUEUE OVERFLOW TOTAL INFORMS

---- ---- --------------- -------- -------------

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/