You are here: Home > CLI Commands > Just_CLI_Topics > show snmp trap-host

show snmp trap-hosts

show snmp trap-hosts

Description

Displays the configured SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap hosts.

Syntax

No parameters.

Example

The output of this command shows details of a SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap host.

(host) # show snmp trap-hosts

 

SNMP TRAP HOSTS

---------------

HOST VERSION SECURITY NAME PORT TYPE TIMEOUT RETRY

---- ------- ------------- ---- ---- ------- -----

10.16.14.1 SNMPv2c public 162 Trap N/A N/A

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/