You are here: Home > CLI Commands > Just_CLI_Topics > show snmp trap-queue

show snmp trap-queue

show snmp trap-queue

Description

Displays the list of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  traps in queue.

Syntax

No parameters.

Example

The output of this command shows the list of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  traps sent to host.

(host) # show snmp trap-queue

 

a)wlsxMgmtUserAuthenticationFailed

The trap indicates that a management user authentication failed.

2013-10-29 08:08:10 Management user authentication failed for user commonuser1 with IP address 10.20.102.79 usermac 00:00:00:00:00:00 server name CiscoACS-2 serverip 10.15.28.41

b)wlsxNUserAuthenticationFailed :

The trap indicates that a user authentication has failed.

2013-10-29 07:47:07 User Authentication failed for user commonuser1 userip 0.0.0.0 usermac 00:5f:12:00:00:00 servername CiscoACS-1 serverip 10.15.28.40 bssid 00:d2:5d:80:00:08 apname v5rapsim_000_000

c)wlsxNAuthServerReqTimeOut:

The trap indicates that the authentication server req timeout

2013-10-29 07:44:58 Authentication request timed out for server CiscoACS-1 serveip 10.15.28.4 username commonuser1 userip 0.0.0.0 usermac 00:5f:12:00:00:00 bssid 00:d2:5d:80:00:08 apname v5rapsim_000_000

d)wlsxNAuthServerTimeOut :

The trap indicates the server taken out of service.

2013-10-29 07:45:48 Authentication server CiscoACS-1 serverip 10.15.28.4 timed out. Time out value is 1383012948 for user commonuser1 ip 0.0.0.0 mac 00:5f:12:00:00:00 bssid 00:d2:5d:80:00:08 apname v5rapsim_000_000

e)wlsNAuthServerIsDown

The trap indicates that an authentication server is down.

2013-10-29 07:44:11 Authentication Server CiscoACS-1 with ip 10.15.28.4 is down.

f)wlsNAuthServerUp

The trap indicates that an authentication server is up.

2013-10-29 07:45:48 Authentication server CiscoACS-1 with ip 10.15.28.4 is up

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/