You are here: Home > CLI Commands > Just_CLI_Topics > show snmp user-table

show snmp user-table

show snmp user-table [user <username> auth-prot [sha | md5] <value> priv-prot [aes | des] <value>]

Description

Displays the list of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  user profile for a specified username.

Syntax

Parameter

Description

auth-prot

Authentication protocol for the user, either HMAC-MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. -98 Digest Authentication Protocol (MD5Message Digest 5. The MD5 algorithm is a widely used hash function producing a 128-bit hash value from the data input. ) or HMAC-SHASecure Hash Algorithm. SHA is a family of cryptographic hash functions. The SHA algorithm includes the SHA, SHA-1, SHA-2 and SHA-3 variants. -98 Digest Authentication Protocol (SHASecure Hash Algorithm. SHA is a family of cryptographic hash functions. The SHA algorithm includes the SHA, SHA-1, SHA-2 and SHA-3 variants. ), and the password for use with the

designated protocol.

priv-prot

Privacy protocol for the user, either AESAdvanced Encryption Standard. AES is an encryption standard used for encrypting and protecting electronic data. The AES encrypts and decrypts data in blocks of 128 bits (16 bytes), and can use keys of 128 bits, 192 bits, and 256 bits. or CBC-DESData Encryption Standard. DES is a common standard for data encryption and a form of secret key cryptography, which uses only one key for encryption and decryption., and the password for use with the designated protocol.

Example

The output of this command shows the list of SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  traps sent to host.

(host) # show snmp user-table

 

SNMP USER TABLE

---------------

USER AUTHPROTOCOL PRIVACYPROTOCOL FLAGS

---- ------------ --------------- -----

Sam SHA AES

fire SHA AES

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/