You are here: Home > CLI Commands > Just_CLI_Topics > show startup-config

show startup-config

show startup-config

Description

Displays the configuration which will be used the next time the controller is rebooted. It contains all the options last saved using the write memory command. Any unsaved changes are not included.

Syntax

No parameters.

Example

The output of this command shows slot details on the controller.

 

(host) # show startup-config

 

version 3.4

enable secret "608265290155fb924578f15b12670a75a37045cbdf62fb0d3a"

telnet cli

telnet soe

loginsession timeout 30

hostname "FirstFloor2400"

clock timezone PST -8

location "Building1.floor1"

mms config 0

controller config 22

 

ip access-list eth validuserethacl

permit any

!

netservice svc-snmp-trap udp 162

netservice svc-dhcp udp 67 68

netservice svc-smb-tcp tcp 445

netservice svc-https tcp 443

netservice svc-ike udp 500

netservice svc-l2tp udp 1701

netservice svc-syslog udp 514

...

...

...

netservice svc-msrpc-udp udp 135 139

netservice svc-ssh tcp 22

netservice svc-http-proxy1 tcp 3128

--More-- (q) quit (u) pageup (/) search (n) repeat

Related Commands

Command

Description

copy

This command copies files to and from the managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/