You are here: Home > CLI Commands > Just_CLI_Topics > show storage

show storage

show storage

Description

Displays the storage information on the controller.

Syntax

No parameters.

Example

The output of this command shows the storage details on the controller.

(host) # show storage

Filesystem Size Used Available Use% Mounted on

/dev/root 57.0M 54.6M 2.3M 96% /

none 70.0M 2.0M 68.0M 3% /tmp

/dev/hda3 149.7M 9.3M 132.6M 7% /flash

/dev/usb/flash3 1.5G 168.6M 1.3G 12% /flash

/dev/usbdisk/2 3.5G 71.4M 3.2G 2% /mnt/usbdisk/2

/dev/usbdisk/1 3.9G 131.0M 3.8G 3% /mnt/usbdisk/1

 

The number at the end of the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device's name is the partition. Unlike the controller's flash, the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device has more than two partitions; not just 0 and 1. When copying a file from a USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device, you must know which partition the target file is on.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master and managed device.

/*]]>*/