You are here: Home > CLI Commands > Just_CLI_Topics > show switches

show switches

show switches [all | regulatory | state {complete | incomplete | inprogress | required} | summary ]

Description

Displays the details of managed device connected to the Mobility Master, including the Mobility Master itself.

Syntax

Parameter

Description

all

List of all managed devices.

regulatory

Displays information about the currently active regulatory file.

state

Configuration status of all managed devices.

summary

Status of all managed devices connected to the Mobility Master.

Example

The output of this command shows that there is a single managed device connected to the Mobility Master.

(host) # show switches all

All Switches

------------

IP Address Name Location Type Version       Status Configuration State Config Sync Time (sec)

---------- ---- -------- ---- -------        ------ ------------------- ----------------------

10.16.12.1 r-wing-94 Building1.floor1 master 6.0.0.0_13782  up UPDATE SUCCESSFUL 0192.0.2.12  CorpA2400    Building1.floor1 master  6.0.0.0_13782  up UPDATE SUCCESSFUL 0

Execute the show switches regulatory command to check if the regulatory file is active on the managed device.

(host) #show switches regulatory

 

All Switches

------------

IP Address Name Location Type Model File Version File Build

---------- ---- -------- ---- ----- ------------ ----------

172.16.0.254 host Building1.floor1 master 7210 1.0_43859 21/4/2014

 

Execute the show switches state complete command to check the progress of the configuration update.

(host)[mynode] #show switches state [incomplete|incomplete|inprogress|required]

(host) [mynode] (config) #show switches state complete

All Switches

------------

IP Address IPv6 Address Name Location Type Model Version

---------- ------------ ---- -------- ---- ----- -------

1.1.1.1 2002::1 abhi_vmc_61.122 Building1.floor1 LC VMC-TACTICAL 8.0.0.0-svcs-ctrl_0000

 

Status Configuration State Config Sync Time (sec) Config ID

---------- -------------------- ---------------------- ---------

up UPDATE SUCCESSFUL 0 22

Total Switches:1

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/