You are here: Home > CLI Commands > Just_CLI_Topics > show telnet

show telnet

show telnet

Description

Displays the status of telnet access using the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. or Serial over EthernetEthernet is a network protocol for data transmission over LAN. (SOE) to the controller.

Syntax

No parameters.

Example

The output of this command shows the status of CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. and SOE access to the controller.

(host) # show telnet

 

telnet cli is enabled

telnet soe is enabled

Related Commands

Related Command

Description

telnet

This command enables telnet to Mobility Master or to an AP through Mobility Master.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master and managed devices.

/*]]>*/