You are here: Home > CLI Commands > Just_CLI_Topics > show threshold-limits

show threshold-limits

show threshold-limits

controlpath-memory|fan-speed|no-of-aps|no-of-locals|total-tunnel-capacity|user-capacity

Description

This command shows current values of the different resources monitored by the managed device.

Syntax

Parameter

Description

controlpath-memory

The output of this command displays the default memory threshold which, when exceeded, will trigger an alert, the current configured threshold, the total memory (in MB) and the currently available memory (in MB).

fan-speed

The output of this command displays the fan alert threshold. This parameter is only available for managed devices with fans, such as the 7200 Series.

no-of-aps

The output of this command displays the following values:

The default threshold for the number of APs, which, when exceeded, will trigger an alert

The current configured threshold.

The maximum number of APs supported by the managed device,

The number of available licenses for campus and remote APsRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link.,

The total number of APs, and the current number of campus, remote and virtual APs.

no-of-locals

The output of this command displays the default threshold for the number of managed devices which, when exceeded, will trigger an alert, and the current configured threshold. The output also displays the maximum number of managed devices that can be connected to this Mobility Master, and the number of managed devices currently connected.

total-tunnel-capacity

The output of this command displays the default tunnel capacity threshold which, when exceeded, will trigger an alert, as well as the current configured tunnel threshold. The output also includes the maximum number of tunnels supported by the managed device, as well as the number of tunnels currently used by the managed device.

user-capacity

The output of this command displays the default user capacity threshold which, when exceeded, will trigger an alert, as well as the current configured user threshold. The output also includes the maximum number of users supported by the managed device, as well as the number of users currently associated with the managed device.

Usage Guidelines

The managed device will send a wlsxThresholdAbove SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap and a syslog error message when the managed device has exceeded a set percentage of the total capacity for that resource. A wlsxThresholdBelow SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap and error message will be triggered if the resource usage drops below the threshold once again.

Example

The following command shows the current alert thresholds for controlpath memory resources:

[host](node)(config) #show threshold-limits controlpath-memory

 

Threshold Values For Controlpath Memory

----------------------------------------

Default(%) Current(%) Total Memory (MB) Available Memory (MB)

---------- ---------- ----------------- ---------------------

85          77          679               225

Related Commands

Command

Description

vrrp

This command configures the VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN..

uplink

This command manages and configures the uplink network connection.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/