You are here: Home > CLI Commands > Just_CLI_Topics > show threshold

show threshold

show threshold

all|controlpath-cpu|controlpath-memory|datapath-cpu|

no-of-aps|no-of-locals|total-tunnel-capacity|user-capacity|

Description

This command shows managed device capacity thresholds which, when exceeded, will trigger alerts.

Syntax

Parameter

Description

all

Display all alert thresholds.

controlpath-cpu

Display the alert threshold for controlpath CPUCentral Processing Unit. A CPU is an electronic circuitry in a computer for processing instructions. capacity. The output of this command shows the percentage of the total controlpath CPUCentral Processing Unit. A CPU is an electronic circuitry in a computer for processing instructions. capacity that must be exceeded before the alert is sent.

The default threshold for this parameter is 45%.

controlpath-memory

Display the alert threshold for controlpath memory consumption. The output of this command shows the percentage of the total memory capacity that must be exceeded before the alert is sent.

The default threshold for this parameter is 85%.

datapath-cpu

Display the alert threshold for datapath CPUCentral Processing Unit. A CPU is an electronic circuitry in a computer for processing instructions. capacity. The output of this command shows the percentage of the total datapath CPUCentral Processing Unit. A CPU is an electronic circuitry in a computer for processing instructions. capacity that must be exceeded before the alert is sent.

The default threshold for this parameter is 30%.

no-of-APs

The maximum number of APs that can be connected to a managed device is determined by that managed device’s model type and installed licenses. This threshold triggers an alert when the number of APs currently connected to the managed device exceeds a specific percentage of its total AP capacity.

The default threshold for this parameter is 80%.

no-of-locals

Display the alert threshold for Mobility Master's capacity to support managed devices.

Mobility Master can support a combined total of 256 managed devices. The output of this command shows the percentage of the total Mobility Master capacity that must be exceeded before the alert is sent. The default threshold for this parameter is 80%.

total-tunnel-capacity

Display the alert threshold for the managed device’s tunnel capacity. The output of this command shows the percentage of the managed device’s total tunnel capacity that must be exceeded before the alert is sent.

The default threshold for this parameter is 80%

user-capacity

Display the alert threshold for the managed device’s user capacity. The output of this command shows the percentage of the total resource capacity that must be exceeded before the alert is sent.

The default threshold for this parameter is 80%.

Usage Guidelines

The managed device will send a wlsxThresholdAbove SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap and a syslog error message when the managed device has exceeded a set percentage of the total capacity for that resource. A wlsxThresholdBelow SNMPSimple Network Management Protocol. SNMP is a TCP/IP standard protocol for managing devices on IP networks. Devices that typically support SNMP include routers, switches, servers, workstations, printers, modem racks, and more. It is used mostly in network management systems to monitor network-attached devices for conditions that warrant administrative attention.  trap and error message will be triggered if the resource usage drops below the threshold once again.

Example

(host) (config) #show threshold all

Controller Capacity Threshold Values

------------------------------------

RESOURCE THRESHOLD(%)

-------- ------------

Datapath-Cpu 30 %

Controlpath-Cpu 80 %

Controlpath-Memory 85 %

Total-Tunnel-Capacity 80 %

Ap-Tunnel-Capacity 80 %

User-Capacity 80 %

No-of-APs 80 %

No-of-locals 80 %

Related Commands

Command

Description

aaa authentication captive-portal

This command configures a Captive PortalA captive portal is a web page that allows the users to authenticate and sign in before connecting to a public-access network. Captive portals are typically used by business centers, airports, hotel lobbies, coffee shops, and other venues that offer free Wi-Fi hotspots for the guest users. authentication profile.

aaa authentication wispr

This command configures WISPrWireless Internet Service Provider Roaming. The WISPr framework enables the client devices to roam between the wireless hotspots using different ISPs. authentication with the WISPrWireless Internet Service Provider Roaming. The WISPr framework enables the client devices to roam between the wireless hotspots using different ISPs. RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  server of an ISPInternet Service Provider. An ISP is an organization that provides services for accessing and using the Internet..

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master and managed devices.

/*]]>*/