You are here: Home > CLI Commands > Just_CLI_Topics > show tunneled-node

show tunneled-node

show tunneled-node {config|state|database}

Description

Displays the wired tunneled node configuration details, the state of the tunneled node, and lists all the tunneled nodes in the database.

Syntax

Parameter

Description

config

Displays the wired tunneled node configuration details.

state

Displays the state of the tunneled node.

database

Displays all the tunneled nodes in the database.

Example

The output of this command shows the tunneled node state.

(host) [mynode]# show tunneled-node state

 

Tunneled Node State

---------

IP MAC s/p state vlan tunnel inactive-time

-- --- --- ----- ---- ------ -------------

192.168.123.14 00:0b:86:40:32:40 1/23 complete 10 9 1

192.168.123.14 00:0b:86:40:32:40 1/22 complete 10 10 1

192.168.123.14 00:0b:86:40:32:40 1/20 complete 10 11 1

On the tunneled node client:

(host) #show tunneled-node state

Tunneled Node State

-------------------

IP MAC s/p state vlan tunnel inactive-time

-- --- --- ----- ---- ------ -------------

192.168.123.16 00:0b:86:40:32:40 1/23 complete 10 21 0

192.168.123.16 00:0b:86:40:32:40 1/22 complete 10 9 0

Related Commands

Command

Description

tunneled-node-address

This command configures the IP address of a tunneled node server.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/