You are here: Home > CLI Commands > Just_CLI_Topics > show ucc client-info

show ucc client-info

show ucc client-info

app

{h323 [detail]|jabber [detail]|noe [detail]|sccp [detail]|sip [detail]|skype4b [detail]|svp [detail] | vocera [detail]|WiFi-Calling [detail]}

detail

sta <mac>

Description

This command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status and CDRCall Detail Record. A CDR contains the details of a telephone or VoIP call, such as the origin and destination addresses of the call, the start time and end time of the call, any toll charges that were added through the network or charges for operator services, and so on. statistics.

 

When VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. calls are prioritized using media classification, the Client Name value is not available.

Syntax

Parameter

Description

app

Displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status and CDRCall Detail Record. A CDR contains the details of a telephone or VoIP call, such as the origin and destination addresses of the call, the start time and end time of the call, any toll charges that were added through the network or charges for operator services, and so on. statistics based on a specific ALGApplication Layer Gateway. ALG is a security component that manages application layer protocols such as SIP, FTP and so on. .

detail

Displays UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status details.

sta <mac>

Displays the detailed record for a specific client based on its MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Example

The following command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status and record:

(host) [mynode] #show ucc client-info

 

Client Status:

--------------

Client IP Client MAC Client Name ALG Server(IP) Registration State Call Status

--------- ---------- ----------- ----- ---------- ------------------ -----------

192.0.2.22 00:23:33:41:c8:b8 Alex SIP 192.0.2.1 REGISTERED Idle

192.0.2.26 24:77:03:9a:6c:dc John Jabber 192.0.2.3 REGISTERED Idle

 

AP Name Flags Device Type Home Agent Foreign Agent

------- ----- ----------- ---------- -------------

AP‑105 OS X 192.0.2.25 NA

AP-135 Win 7 192.0.2.25 NA

 

Total Client Entries:2

Flags: V - Visitor, A - Away, W - Wired, R - Remote, E - External

The output of this command includes the following information:

Column

Description

Client IP

Displays the IP address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client MAC

Displays the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client Name

Displays the username of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

ALG

Displays the Application Layer GatewayGateway is a network node that allows traffic to flow in and out of the network. protocol used by the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Server(IP)

Displays the IP address of call server the client is registered to.

Registration State

Displays the registration status of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call. Possible values are:

Challenged

Registered

Registering

Unregistered

Rejected

Unknown

Call Status

Displays the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call status of the client. Possible values are:

Idle

In-Call

AP Name

Displays the name of the AP to which the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client is associated.

Flags

Displays if the client is a visitor, away, wired, remote, or external.

Device Type

Displays the device type identification of the client.

Home Agent

Displays the IP address of the managed device to which the client is connected or the home agent of the client if mobile IP is enabled.

Foreign Agent

Displayed if the client has roamed to another managed device when mobile IP is enabled.

The following command displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. client status details:

(host) [mynode] #show ucc client-info detail

 

Help: [C] - Metric calculated at the Controller

[A] - Metric calculated at the AP

[E] - Metric calculated End-to-End

D - Delay in milliseconds

J - Jitter in milliseconds

PL - Packet Loss in percent

 

Client Status Details(Average):

-------------------------------

Client IP Client MAC Client Name Controller Delay(ms)/Jitter(ms)/PktLoss(%)

--------- ---------- ----------- ------------------------------------------

192.0.2.22 00:23:33:41:c8:b8 Alex 1.33/0.15/1.99

192.0.2.26 24:77:03:9a:6c:dc John 0.82/0.17/0.05

 

AP Delay(ms)/Jitter(ms)/PktLoss(%) End-to-End Delay(ms)/Jitter(ms)/PktLoss(%) Call-Dur(sec) TxRate(Mbps) RxRate(Mbps)

---------------------------------- ------------------------------------------ ------------- ------------ ------------

1.04/0.09/2.26 79.00/3.23/1.72 1114 84.42 130.56

1.12/0.15/2.63 10.36/3.55/0.07 584 27.02 30.12

 

ICH Denied ALG

---------- ---

0 SIP

0 Jabber

 

Total Client Entries:2

The output of this command includes the following information:

Column

Description

Client IP

Displays the IP address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client MAC

Displays the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client Name

Displays the username of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Controller Delay(ms)/ Jitter(ms)/PktLoss(%)

Displays the WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. delay (in milliseconds), jitter (in milliseconds), and packet loss (in percentage). This is the metric calculated at the managed device.

AP Delay(ms)/ Jitter(ms)/PktLoss(%)

Displays the WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. delay (in milliseconds), jitter (in milliseconds), and packet loss (in percentage). This is the metric calculated at the AP.

End-to-End Delay(ms)/ Jitter(ms)/PktLoss(%)

Displays the end-to-end delay (in milliseconds), jitter (in milliseconds), and packet loss (in percentage). This field takes the wired and wireless network QoSQuality of Service. It refers to the capability of a network to provide better service and performance to a specific network traffic over various technologies. parameters into consideration.

Call-Dur(sec)

Displays the average call duration in seconds.

TxRate(Mbps)

Displays the average transmission rate in MbpsMegabits per second.

RxRate(Mbps)

Displays the average receive rate in MbpsMegabits per second.

ICH Denied

Displays the number of calls that were not prioritized due to channel utilization threshold exceeding on the AP radio.

ALG

Displays the Application Layer GatewayGateway is a network node that allows traffic to flow in and out of the network. protocol used by the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

The following command displays a detailed record for a specific client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address:

(host) [mynode] #show ucc client-info sta 00:21:6a:b9:5f:34

 

Help: [C] - Metric calculated at the Controller

[A] - Metric calculated at the AP

 

Station Report:

---------------

Client IP Client MAC AP-Name SNR Avg Tx Rate(Mbps)

--------- ---------- ------- --- -----------------

10.15.88.245 00:21:6a:b9:5f:34 AP-135-1 45 54.56

 

Tx Drop(%) Tx Retry(%) Avg Rx Rate(Mbps) Rx Retry(%) Un-steerable (reason)

---------- ----------- ----------------- ----------- ---------------------

1.06 24.06 43.16 0.41 NA

 

Active Calls:

-------------

CDR ID UCC Call ID Client IP Client Name ALG Dir Called To Dur(sec) Orig-Time

------ ----------- --------- ----------- --- --- --------- -------- ---------

116 12 10.15.88.245 Alex skype4b OG Joe 421 Jan 20 01:36:08

 

Status Call Type Client Health UCC Score[C] UCC Score[A] MOS

------ --------- ------------- ------------ ------------ ---

ACTIVE Voice 62 81.52/Good 83/01Good 4.17/Good

 

Call History:

-------------

CDR ID UCC Call ID Client IP Client Name ALG Dir Called To Dur(sec) Orig-Time

------ ----------- --------- ----------- --- --- --------- -------- ---------

54 23 10.15.88.245 Alex skype4b OG Mike 847 Jan 16 02:45:22

53 22 10.15.88.245 Alex skype4b OG Ken 789 Jan 14 06:53:41

 

Status Reason Call Type Client Health UCC Score[C] UCC Score[A] MOS

------ ------ --------- ------------- ------------ ------------ ---

SUCC Terminated Voice 49 71.72/Good 73.99/Good 3.85/Good

SUCC Terminated Voice/Conf Call 44 77.22/Good 79.01/Good 4.13/Good

The output of this command includes the following information:

Column

Description

Station Report

Client IP

Displays the IP address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client MAC

Displays the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client Name

Displays the username of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

AP-Name

Displays the name of the AP handling the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call.

SNR

Displays the Signal-to-noise (SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise.) ratio. SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise. is the power ratio between an information signal and the level of background noise.

Avg Tx Rate(Mbps)

Displays the average transmission rate in MbpsMegabits per second.

Tx Drop(%)

Displays the transmission packet drop in percentage.

Tx Retry(%)

Displays the transmission retry in percentage.

Avg Rx Rate(Mbps)

Displays the average receive rate in MbpsMegabits per second.

Rx Retry(%)

Displays the receive retry in percentage.

Un-steerable (reason)

Displays the reason for steering/not steering the client to another bandBand refers to a specified range of frequencies of electromagnetic radiation.. Possible values are:

Sticky

Load Balance

Band Steer

Band Balance

Administrator Added

(IOS)

NA

Active Calls

CDR ID

Displays the Call Detail Record ID of a particular voice and video calls, desktop sharing, or file transfer session.

UCC Call ID

Displays the unique identifier for all call legs of a particular voice and video calls, desktop sharing, or file transfer session.

Client IP

Displays the IP address of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Client Name

Displays the username of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

ALG

Displays the Application Layer GatewayGateway is a network node that allows traffic to flow in and out of the network. protocol used by the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client.

Dir

Displays the direction of the call. Possible values are:

OG—Outgoing

IG—Incoming

Called To

Displays the username of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. client being called.

Dur(sec)

Displays the duration of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call in seconds.

Orig-Time

Displays the time at which the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call originated.

Status

Displays the status of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call. Possible values are:

SUCCESS

FAILED

ABORTED

BLOCKED

FORWARDED

ALERTING

HOLD

ACTIVE

Call Type

Displays the type of VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call or session. Possible values are:

Not Available

Voice

Video

Desktop Sharing

File Transfer

Voice/Conf Call

Video/Conf Call

Desktop-Sharing/Conf Call

File-Transfer/Conf Call

Client Health

Displays the ratio of ideal air time required for transmitting a packet from an AP to a client to the actual air time taken for the packet transmission in percentage. Ideal air time assumes highest data rate without any retransmission.

UCC Score[C]

Displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. score based on the quality of the voice call. This is the metric calculated at the managed device.

UCC Score[A]

Displays the UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. score based on the quality of the voice call or desktop sharing session. This is the metric calculated at the AP.

MOS

Displays the Mean Opinion Score of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. call.

Call History

Reason

Displays the reason code for call termination. Possible values are:

NA

Capacity Reached

401 unauthorized

487 request timeout

Request timeout

Request canceled

Request terminated

Session timeout

Session timer expired

Session expired - request timeout

Aborted

Terminated

Forwarded

Transferred

Inactivity

Wrong number

Peer reset

Client reset

No answer

Missed

Parked

Invalid number

Tunnel down

Moved temporarily

4xx error

5xx error

Call leg does not exist

DELTS request

TCLAS flow deleted

No reason

NOTE: For information on additional field descriptions, refer the field descriptions under the Active Calls heading.

Related Commands

Command

Description

ucc

This command configures the various UCCUnified Communications and Collaboration. UCC is a term used to describe the integration of various communications methods with collaboration tools such as virtual whiteboards, real-time audio and video conferencing, and enhanced call control capabilities. Application Layer GatewaysGateway is a network node that allows traffic to flow in and out of the network. (ALGs).

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Config or Enable mode on Mobility Master.

/*]]>*/