You are here: Home > CLI Commands > Just_CLI_Topics > show upgrade-profile

show upgrade-profile

Description

The settings in the centralized image upgrade profile uses ArubaOS images to upgrade the managed devices with the ArubaOS images hosted on an image server. When an upgrade action command is executed on the Mobility Master, the upgrademgr process running on Mobility Master sends an upgrade request to upgrademgr process running on corresponding managed devices. The managed devices then connect to the image server and download the appropriate image file after verifying the validity of the image file, before upgrading to the downloaded image file.

Syntax

No parameters.

Usage Guidelines

The centralized image upgrade feature is enabled and configured on managed devices only, and supports up to 100 simultaneous image downloads.

Example

(host) (config) # show upgrade-profile

 

Upgrade Profile

---------------

Parameter Value

--------- -----

Server IP address N/A

Server IPv4/IPv6 address 2000:192:168:28::59

Username root

Password ********

Protocol scp

File path Builds

The output of this command includes the following information:

Parameter Description Range Default

serverip

 

The IPv4 address of the image server. This parameter is only used by managed devices running versions prior to ArubaOS 8.2 and accepts only IPv4 address.

NOTE: For FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.  or SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. protocol, specify the username and password.

- -

serveraddr

The IPv4 or IPv6 address of the image server. This parameter is only used by managed devices running ArubaOS 8.2.

NOTE: For FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.  or SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network. protocol, specify the username and password.

- -

Username

If the protocol parameter is set to FTP or SCP, this parameter displays the user name that ArubaOS uses to connect to the image server.

- -
Password

If the protocol parameter is set to FTP or SCP, this parameter displays the password that ArubaOS will use to connect to the image server.

 

- -
Protocol

Specify the protocol used to send the software to the managed device.

TFTPTrivial File Transfer Protocol. The TFTP is a software utility for transferring files from or to a remote host.

FTPFile Transfer Protocol. A standard network protocol used for transferring files between a client and server on a computer network.

SCPSecure Copy Protocol. SCP is a network protocol that supports file transfers between hosts on a network.

- TFTPTrivial File Transfer Protocol. The TFTP is a software utility for transferring files from or to a remote host.
File path

File path to the location on the image server where the image file(s) reside.

- -

Related Commands

Command

Description

upgrade-profile

This command is used to configure the upgrade profile.

Command History

Release

Modification

ArubaOS 8.2.0.0

The serveraddr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/