You are here: Home > CLI Commands > Just_CLI_Topics > show usb

show usb

show usb

cellular

ports [<address>]

test <address>

usb-modeswitch

verbose

Description

Display detailed USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device information on a stand-alone controller or managed device.

Syntax

Parameter

Description

cellular

Enter the keyword cellular to display cellular devices.

ports

Enter the keyword ports to display detailed TTYTeleTypeWriter. TTY-enabled devices allow telephones to transmit text communications for people who are deaf or hard of hearing as well as transmit voice communication. port information such as signal strength.

test

Enter the keyword test to test the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. TTYTeleTypeWriter. TTY-enabled devices allow telephones to transmit text communications for people who are deaf or hard of hearing as well as transmit voice communication. ports.

NOTE: Testing an invalid modem port may cause the stand-alone controller or managed device to “hang”. To resolve this, unplug and re-plug the modem.

usb-modeswitch

USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. mode switch utility log.

verbose

Enter the keyword verbose to display detailed USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. information including serial number and USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. type.

Usage Guideline

This command should be executed from the managed device only.

Examples

The USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. Device table, in the example below, displays the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port is in the 'Device Ready' state, meaning that the port has passed the diagnostic test and is ready to send and receive data.

(host-md) #show usb

 

USB Device Table

----------------

Address Product Vendor ProdID Serial Type Profile State Bus

------- ------- ------ ------ ------ ---- ------- ----- ---

18 Novatel Wireless CDMA 1410 4100 091087843891000 Cellular new_modem Device ready

 

Below is an example of the show usb verbose display output (partial).

(host-md) #show usb verbose

...

T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0

D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=1410 ProdID=4100 Rev= 0.00

S: Manufacturer=Novatel Wireless Inc.

S: Product=Novatel Wireless CDMA

S: SerialNumber=091087843891000

C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA

...

Related Commands

Command

Description

usb

This command disconnects and reclassifies a USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device connected to a managed device.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master and managed devices.

/*]]>*/