You are here: Home > CLI Commands > Just_CLI_Topics > show ipv6 interface

show ipv6 interface

show ipv6 interface [brief]

Description

View IPv6-related information on all interfaces.

Syntax

Parameter

Description

brief

Optional parameter. If specified, displays the IPv6-related information on all the interfaces in a summary format.

Example

(host) [mynode] #show IPv6 interface

VLAN1 is up line protocol is down

IPv6 Router Advertisements are disabled

IPv6 is disabled

VLAN46 is up line protocol is up

IPv6 is enabled, link-local address is fe80::1a:1e00:2e00:9f0

Global unicast address(es):

2046:eab::25, subnet is 2046:eab::/64

IPv6 Router Advertisements are disabled

VLAN50 is up line protocol is up

IPv6 Router Advertisements are disabled

IPv6 is disabled

VLAN10 is up line protocol is up

IPv6 is enabled, link-local address is fe80::1a:1e00:a00:9f0

Global unicast address(es):

2010:eab::1, subnet is 2010:eab::/64

fc01:eab::1, subnet is fc01:eab::/64

IPv6 Router Advertisements are enabled

loopback is up line protocol is up

IPv6 is enabled, link-local address is fe80::1a:1e0f:ff00:9f0

Global unicast address:

2046:eab::2, subnet is 2046:eab::2/128

TUNNEL2 is up line protocol is up

tunnel mode is Layer2 IPv6 GRE, tunnel vlan 10

tunnel source ipv6 address is 2046:eab::25

tunnel destination ipv6 address is 2047:eab::25

 

(host) [mynode] #show ipv6 interface brief

Interface [Status/Protocol]

vlan 800 [ up/up ]

unassigned

vlan 1 [ up/down]

unassigned

vlan 802 [ up/up ]

fe80::b:8603:226d:863c/64

2082::802:1/64

vlan 32 [ up/up ]

unassigned

vlan 801 [ up/up ]

fe80::b:8603:216d:863c/64

2005:81::1/64

vlan 50 [ up/down]

fe80::b:8600:326d:863c/64

2050:3::50:1/64

loopback [ up/up ]

fe80::b:860f:ff6d:863c/64

mgmt [down/down]

unassigned

tunnel 2 [ up/up ]

unassigned

The following table details the columns and content in the show command.

Column

Description

Interface

List the interface and interface identification with the IPv6 address and netmaskNetmask is a 32-bit mask used for segregating IP address into subnets. Netmask defines the class and range of IP addresses. for the interface, if configured.

Status/Protocol

States the administrative status and the IPv6 status on the interface.

Enabled—up

Disabled—down

Related Commands

Command

Description

interface vlan

This command configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Available in Config or Enable mode on Mobility Master.

/*]]>*/