You are here: Home > CLI Commands > Just_CLI_Topics > show ipv6 mld config

show ipv6 mld config

show ipv6 mld config

Description

Displays MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. configuration details.

Example

This example displays the current MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. configuration values.

(host) [mynode] #show ipv6 mld config

 

MLD Config

----------

Name Value

---- -----

robustness-variable 2

query-interval 125

query-response-interval 100

ssm-range FF3X::4000:1 - FF3X::FFFF:FFFF

 

The output of this command includes the following parameters:

Parameter

Description

robustness-variable

Denotes the value that is used to calculate the timeout value of an MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. client.

query-interval

Denotes the time interval at which the MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. query is sent.

query-response-interval

Denotes the time interval at which the MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. query response should be received.

ssm-range

Denotes the source specific multicast range. When you enter the SSM Range ensure that the upstream router has the same range, else the multicast stream would be dropped.

NOTE:  Only SSM enabled clients can subscribe to the multicast stream in the multicast range. The default ssm-range in case of IPv6 is FF3X::4000:1 - FF3X::FFFF:FFFF, this range is configurable.

If MLDv1 or a non SSM client sends a report on a specified SSM range, it is rejected by the managed device.

Related Commands

Command

Description

ipv6 mld

This command configures the IPv6 MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. (Multi-listener discovery) parameters.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/