You are here: Home > CLI Commands > Just_CLI_Topics > show ipv6 mld counters

show ipv6 mld counters

show ipv6 mld counters

Description

Displays the statistics of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link..

Example

This example displays the MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. statistics for the following values.

(host) [mynode] #show ipv6 mld counters

 

MLD Statistics

--------------

Name Value

---- -----

received-total 0

received-queries 0

received-v1-reports 0

received-v1-leaves 0

received-v2-reports 0

received-unknown-types 0

len-errors 0

checksum-errors 0

not-vlan-dr 0

transmitted-queries 0

forwarded 0

non-conforming-mld 0

The output of this command includes the following parameters:

Parameter

Description

received-total

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. messages.

received-queries

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. queries.

received-v1-reports

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. v1 reports received.

received-v1-leaves

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. v1 leave messages received.

received-v2-reports

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. v2 reports received.

received-unknown-types

The total number of unrecognized messages received.

len-errors

The total number of error message where the length check has failed.

checksum-errors

The total number of error message where the checksum has failed.

not-vlan-dr

The number of messages received for which the current managed device is not the designated routerDesignated router refers to a router interface that is elected to originate network link advertisements for networks using the OSPF protocol..

transmitted-queries

The total number of transmitted MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. queries.

forwarded

The total number of MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. messages forwarded.

non-conforming-mld

The total number of non confirming MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. messages.

Related Commands

Command

Description

ipv6 mld

This command configures the IPv6 MLDMulticast Listener Discovery. A component of the IPv6 suite. It is used by IPv6 routers for discovering multicast listeners on a directly attached link. (Multi-listener discovery) parameters.

interface vlan

This command configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/