You are here: Home > CLI Commands > Just_CLI_Topics > show ipv6 neighbors

show ipv6 neighbors

show ipv6 neighbors

Description

Displays the IPv6 neighbors configured on a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

Usage Guidelines

This command displays the IPv6 neighbors configured on a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface via the ipv6 neighbor command.

Examples

The example below shows the ipv6 neighbors configured on VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. 1 .

(host) [mynode] #show ipv6 neighbors vlan 1

 

IPv6 Neighbors

--------------

IPv6 Address Age Link-layer Addr State Interface

------------ --- --------------- ----- ---------

2cce:205:160:100::fe - 00:0b:86:61:13:28 PERMANENT vlan 1

Related Commands

Command

Description

ipv6 neighbor

This command configures an IPv6 static neighbor on a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Available in Config or Enable mode on Mobility Master.

/*]]>*/