You are here: Home > CLI Commands > Just_CLI_Topics > show ipv6 pd status

show ipv6 pd status

show ipv6 pd status

Description

Displays the prefix obtained by the PD client on uplink.

Example

The following example displays the status of the IPv6 prefix deligation.

(host)[mynode] #show ipv6 pd status

DHCPv6 PD Client is enabled

Uplink VLAN : 100

Label : site1

Prefix : 2001:0:3::/48

65536 unique /64 prefixes are derivable from the acquired IA PD lease

Preferred lifetime 604800s, Valid lifetime 2592000s

Last request/renewal for the lease done at Thu Apr 14 04:46:15 2016

Lease expires at Sat May 14 04:46:15 2016

Downlink VLANs

--------------

VlanId Prefix

------ ------

101 2001:0:3:12:1:2:3:4/64

Related Commands

Command

Description

ipv6 enable

This command enables IPv6 packet processing globally.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Available in Config or Enable mode on Mobility Master.

/*]]>*/